Query returned 1800 results.
Material selection - A qualitative case study of five design consultancies
Asbjorn Sorensen, Charlotte; Warell, Anders; Jagtap, Santosh // 2017
suggest (a) that risk management has a major influence on the material selection process, (b) that negotiations of project boundaries in the ‘fuzzy’ pre-design phase has crucial influence on the risk ...
Matrix-based system modelling to predict properties change propagation
Luedeke, Tobias; Kaspar, Jerome; Meiser, Philip; Schneberger, Jan-Henrik; Herrmann, Hans-Georg; Vielhaber, Michael // 2017
A significant shorter pre-development time in the automotive industry without physical prototypes due to a quicker generation of concepts is key to reduce development cost and to reach a higher ...
mecPro˛ - A holistic concept for the model-based development of cybertronic systems
Eigner, Martin; Dickopf, Thomas; Schneider, Marc; Schulte, Tim // 2017
While today's products are increasingly developing into high-tech products in the meaning of Industrie 4.0, Internet of Things or Industrial Internet, the processes, methods and concepts for the ...
Methodology for multiple life cycles product ecodesign
Troussier, Nadege; Sirina, Natalia; Adragna, Pierre-Antoine; Amaya, Jorge; Reyes, Tatiana // 2017
Knowing how to design new production systems in order to better address sustainable development is a major stake. In this framework, designing new value networks that imply new products should ...
Modelling and simulating the effect of coordination on PD performance while handling change
Rajapaksha, Janaka; Mirkovic, Katja; Robinson, David; Wynn, David // 2017
Analysing effect of coordination on performance of complex Product Development (PD) processes and understanding impact of change within PD processes on performance have been recognised as pivotal in ...
Modelling the design parameters dynamics with Petri nets
Juranic, Jasmin; Pavkovic, Neven; Naumann, Thomas; Marjanovic, Dorian // 2017
The aim of the presented research is to develop methods and tools which would enable consistent dynamic updating and propagation of updated design information in teamwork in a manner that will not ...
Navigating the common approaches to product development
Vance, Julia K.; Giambalvo, Jack; Hoffenson, Steven // 2017
Many design approaches are used and taught in industry and academia, and it is difficult even for seasoned design professionals to know which to use. These design approaches were developed in ...
Necessary extension of conventional idea processes by means of a method for the identification of radical product ideas
Herrmann, Thorsten; Binz, Hansgeorg; Roth, Daniel // 2017
The high failure rate of trials for implementing radical innovations underlines a demand for supporting the development process for new radical innovations. This demand has arisen in many companies ...
Neural network-based survey analysis of risk management practices in new product development
Kampianakis, Andreas; Oehmen, Josef // 2017
The current study investigates the applicability of Artificial Neural Networks (ANNs) to analyse survey data on the effectiveness of risk management practices in product development (PD) projects, ...
On characterization of technology readiness level coefficients for design
Fahimian, Mahi; Behdinan, Kamran // 2017
Technology innovation is an important driving factor in creating competitive advantage in industries that have evolved by convergence of technology and design. In this industries, technology ...
OSLC based approach for product appearance structuring
Ebeling, René; Eigner, Martin // 2017
Within early phases of a product lifecycle, a lack of process connections between CAD design, product appearance configuration as well as virtual reality and other visualisation scenarios can still ...
Pattern recognition for the integration of mechanical simulations in product development workflows
Schweigert, Sebastian; Schöner, Martin; Lindemann, Udo // 2017
The emergence of computer-aided systems and especially numerical methods has revolutionized the product development process. Several types of simulations and calculations during the process are ...
Performance monitoring and control for an additive manufacturing factory - A case study in the aerospace industry
Judalet, Nicolas; Kazakçi, Akin; Le Gouguec, Emmanuel; Balvay, Arnaud // 2017
Additive Manufacturing (AM) is a promising technology that opens many new perspectives for design, logistics and production. A few state-of-the art industrial companies are beginning to industrialize ...
Predicting indirect process costs of engineering change based on a task characteristic perspective
Gebhardt, Marcel // 2017
Today companies are capable to make precise predictions of engineering change costs incurred in producing departments. But implementing engineering changes is a work-sharing task. Besides production ...
Process model for change management in the system of chassis-mounted parts of commercial vehicles
Stocker, Johannes Michael; Thoma, Christoph; Schmidt, Michael; Kreimeyer, Matthias; Lienkamp, Markus // 2017
Due to the high amount of interrelations, such as spatial dependencies, material exchange, energy transfer and information flow, the chassis-mounted parts, located between the axles of a commercial ...
Process model for data-driven business model generation
Benta, Christian; Wilberg, Julian; Hollauer, Christoph; Omer, Mayada // 2017
Digitalization is advancing fast and at the same time the volume of data is increasing. Examples from industry show that business models using big data can lead to competitive advantages. Currently ...
Product description in terms of advantages and drawbacks: Exploiting patent information in novel ways
Chiarello, Filippo; Fantoni, Gualtiero; Bonaccorsi, Andrea // 2017
Patents are an enormous source of valuable information. Unfortunately only a limited number of elements are targeted in them (mainly legal) and most of the design knowledge is lost or not exploited. ...
PROGRESS CARDS AS A TOOL FOR SUPPORTING REFLECTION, MANAGEMENT AND ANALYSIS OF DESIGN STUDIO PROCESSES
Jaskiewicz, Tomasz; van der Helm, Aadjan // 2017
This paper presents “progress cards” as a tool that supports design students in planning and reflecting on their design processes, while providing design studio coaches and design methods researchers ...
READY FOR SUCCESS, FIRST YEAR EFFICIENCY FOR INDUSTRIAL DESIGN ENGINEERING EDUCATION
Blom, Stephan; Bosch, Mirjam van den // 2017
The Industrial Design Engineering (IDE) bachelor program of the School of Engineering and Applied Science at the Rotterdam University of Applied Sciences started a program in 2015. Its goal was to ...
REDEFINING THE BACHELORS CURRICULUM IN DESIGN AND MEDIA
Sathikh, Peer Mohideen // 2017
Nearly one hundred years after the Bauhaus, design and media education has evolved, keeping up with advances in science and technology, and broader and deeper insights into humanities and social ...
Rise and fall of platforms: Systematic analysis of platform dynamics thanks to axiomatic design
Legrand, Julien; Thomas, Maxime; Le Masson, Pascal; Weil, Benoît // 2017
While platforms are multiplying across industries, the laws governing their dynamic are still poorly understood. The high diversity of disciplines covering the topic, spanning from strategy ...
Structuring information in technical inheritance with PDM systems
Scheidel, Wieben; Mozgova, Iryna; Lachmayer, Roland // 2017
Nowadays a product development process is often based on experience and collected product lifecycle information. The communication between machines and equipment and a consistency throughout the ...
Support management of product families and the corresponding automation systems – A method to capture and share design rationale
Poorkiany, Morteza; Johansson, Joel; Elgh, Fredrik // 2017
The ability to innovate and launch customized products that are well matched to customer demands is a competitive factor for many manufacturing companies. Development of highly customized products ...
Supporting development teams in the early stages of product development through DfX-based knowledge management system and communication platform
Ugurlu, Sinan; Gerhard, Detlef // 2017
In the product development, many aspects such as usability, safety, ergonomics, and recycling have to be taken into account. Development companies are required to make more robust and accurate ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.